Track Manufacturing Co. Private Limited
Track Manufacturing Co. Private Limited
Connaught Place, New Delhi, Delhi
GST No. 07AACCT5680N1ZS
Call 08048737730 66% Response Rate
Send E-mail

Hospital Waste Incinerator

Prominent & Leading Manufacturer from New Delhi, we offer microwave based hospital waste disinfection system.
Request CallBack
Microwave Based Hospital Waste Disinfection System
Get Best Quote

Microwave Based Hospital Waste Disinfection System

Approx. Price: Rs 15 Lakh / PieceGet Latest Price
Product Details:
Minimum Order Quantity1 Piece
Country of OriginMade in India
Usage/ApplicationMicrowave Waste Disinfection System
Type Of IncineratorHospital Waste Incinerator
Power SourceElectrical
Waste TypeMedical Waste
BrandTRACK / UDS
Capacity10 Ltrs per hours
Burning Ability10 Ltrs.
Average Burn Out Time1 Hours
MaterialStainless Steel
Automation GradeAutomatic
I Deal InNew Only
FeaturesMicrowave Technology
Energy Consumption230 Volts 50Hz.
Product Dimension1040x1050x630mm (HxWxD)
Weight200kgs. (approx.)
Furnace Chamber TemperatureStandard
Air BlowerStandard
Burning EfficiencyStandard
ChamberStainless Steel
Voltage230 Volts 50Hz.
Minimum Order Quantity1
Frequency2450 Mhz.
Model Name/NumberTDS10
HeatingYes
Body Type MaterialStainless Steel
Heater PowerStandard
Dimension1040x1050x630mm (approx.)
Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 
Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.
Salient Features PLC based Operations Automatic Water Addition. Interlock and alarm generation for II Load operation. Report is printed for quantity of waste disinfected in respective cycle. Safety door interlock.On line temperature display and printing. Reduction in waste volume Compact and environment friendly.Non-infectious end product.No chemicals to treat/ store/discard.
Specification Outer Body -Aesthetically configured body of coated steel. Inner Chamber -Specially designed rectangular chamber made of stainless steel. Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection. Waste Container -Microwave proof specially moulded container to hold medical waste. Exhaust System -Specially designed noiseless system for the main chamber. Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer. PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements. Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.

Technical SpecificationModel No.: TDS10Rated Capacity Throughput: 10 lit/hr.Microwave Generator :HF Output: 1.00 KWFrequency: 2450 MHz Input Voltage: 230 Volts,50Hz Current: 10 Amp max. Dimensions : 1040x1050x630mm (HxWxD)Weight : 200kgs.(approx.)

Additional Information:
  • Item Code: TDS10
  • Delivery Time: 7-10 Days
  • Packaging Details: Standard
Yes! I am Interested
Request CallBack
Microwave Based Hospital Waste Disinfection System
Get Best Quote

Microwave Based Hospital Waste Disinfection System

Approx. Price: Rs 25 Lakh / PieceGet Latest Price
Product Details:
Minimum Order Quantity1 Piece
Country of OriginMade in India
Usage/ApplicationHospital Waste Disinfection Systems
Type Of IncineratorHospital Waste Incinerator
Power SourceElectrical
Waste TypeHospital Waste
BrandTRACK / UDS
Capacity10 Ltrs per hours
Burning Ability10 Ltr.
Average Burn Out Time1 hour
MaterialStainless Steel
Automation GradeFully Automatic PLC Controlled Process
I Deal InNew Only
FeaturesLow maintenance compared to autoclaving
Energy Consumption230 Volts 50Hz.
Product Dimension1540x1040x630mm (approx.)
Weight250kgs. (approx.)
Furnace Chamber TemperatureStandard
Air BlowerStandard
Burning EfficiencyStandard
ChamberStainless Steel
Chimney HeightNA
Control PanelYes
Voltage230 Volts 50Hz.
Minimum Order Quantity1
Frequency2450 MHz
Model Name/NumberTDS30
HeatingYes
Body Type MaterialStainless Steel
Heater PowerStandard
Dimension1540x1040x630mm (HxWxD)
Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 
Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.
Salient Features• PLC based Operations Automatic Water Addition.• Interlock and alarm generation for II "Load" operation.• Report is printed for quantity of waste disinfected in respective cycle.• Safety door interlock.• On line temperature display and printing.• Reduction in waste volume.• Compact and environment friendly.• Non-infectious end product.• No chemicals to treat/ store/discard.
Specification• Outer Body -Aesthetically configured body of coated steel.• Inner Chamber -Specially designed rectangular chamber made of stainless steel.• Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection.• Waste Container -Microwave proof specially moulded container to hold medical waste.• Exhaust System -Specially designed noiseless system for the main chamber.• Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer.• PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements.• Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.

Model No. TDS30Rated Capacity Throughput: 30 lit/hr.Microwave Generator :HF Output: 1.50 KWFrequency: 2450 MHz Input Voltage: 230 Volts,50Hz Current: 15 Amp max. Dimensions : 1540x1040x630mm³ (HxWxD)Weight : 250kgs.(approx.)

Additional Information:
  • Production Capacity: 1
  • Delivery Time: 7-10 Days
  • Packaging Details: Standard
Yes! I am Interested
Request CallBack
Microwave Based Hospital Waste Disinfection System
Get Best Quote

Microwave Based Hospital Waste Disinfection System

Approx. Price: Rs 35 Lakh / PieceGet Latest Price
Product Details:
Minimum Order Quantity1 Piece
Weight300kgs. (approx.)
Furnace Chamber TemperatureStandard
Air BlowerStandard
Burning EfficiencyStandard
ChamberStainless Steel
Chimney HeightNA
Control PanelDigital
Voltage230 Volts 50Hz.
Minimum Order Quantity1
Frequency2450 MHz.
Model Name/NumberTDS60
HeatingYes
Body Type MaterialStainless Steel
Heater PowerStandard
Dimension1700x1050x630mm (HxWxD)
Country of OriginMade in India
Usage/ApplicationHospital Waste Disinfection System
Type Of IncineratorHospital Waste Incinerator
Power SourceElectrical
Waste TypeHospital Waste
BrandTRACK
Capacity10 Ltrs. per hour
Burning Ability10 Ltrs.
Average Burn Out Time1 Hour
MaterialStainless Steel
Automation GradeFully automatic PLC controlled.
I Deal InNew Only
FeaturesMicrowave Based Disinfection System
Energy Consumption230 Volts,50Hz.
Product Dimension1700x1050x630mm. (approx.)
Society for Applied Microwave Electronics and Engineering Research  working as autonomous R&D institution under Ministry of Electronics and Information Technology ; Developed indigenous technology, known as Microwave based Disinfection System for hospital waste disposal. Among the various methods recommended for disposal of infectious waste viz. Incineration, autoclaving, Microwave, deep burial; Microwave offers many advantages. Microwave heating is a molecular phenomenon. Microwaves heat the desired material directly without heating the surrounding structure. Microwave energy penetrates and heats the entire material at nearly same rate. Thus the heating is more uniform throughout the material and not entirely dependent on thermal conductivity of the material. Because of this Microwave heating can do a job faster. Further, after a predetermined heating cycle is over, infectious waste is converted into normal municipal waste, which can be disposed off along with other waste. 
Microwave method is zero polluting and no contaminated water is discharged in the process and does not cause hazards to environment. No Need of pressurised vessel as in Autoclave giving rise to high risk of operation. Does not produce odour and steam which is again much friendly to environment. MicroDS performs a fully automatic PLC controlled process. And hence does not require highly skilled operator. MicroDS does not require consumables. Very low maintenance required compared to Autoclaving.
Salient Features• PLC based Operations Automatic Water Addition.• Interlock and alarm generation for II "Load" operation.• Report is printed for quantity of waste disinfected in respective cycle.• Safety door interlock.• On line temperature display and printing.• Reduction in waste volume.• Compact and environment friendly.• Non-infectious end product.• No chemicals to treat/ store/discard.
Specification• Outer Body -Aesthetically configured body of coated steel.• Inner Chamber -Specially designed rectangular chamber made of stainless steel.• Turn Table -Precisely balanced, slow-speed turn table with concealed drive mechanism and fool coverage and disinfection.• Waste Container -Microwave proof specially moulded container to hold medical waste.• Exhaust System -Specially designed noiseless system for the main chamber.• Automatic Moistening System -Internally installed moisturization mechanism to facilitate uniformity of heat dissipation and transfer.• PLC Systems -Programmable Logic Control system to ensure totally automatic disinfection cycle with safety interlocks and LCD display arrangements.• Temperature Recorder - Online temperature display along with recording system to measure disinfection performance.

Model No. TDS60Rated Capacity Throughput: 60 lit/hr.Microwave Generator :HF Output: 3.00 KWFrequency: 2450 MHz Input Voltage: 230 Volts,50Hz Current: 20 Amp max. Dimensions : 1700x1050x630mm³ (HxWxD)Weight : 300kgs.(approx.)

Additional Information:
  • Item Code: TDS60
  • Production Capacity: 1
  • Delivery Time: 7-10 Days
  • Packaging Details: Standard
Yes! I am Interested
X